Monday, November 24, 2014

MY DIY 3D Printer update

Here are a couple of tricks I have learned.  When I first started printing everything worked fine.  Then after making about 5 things they started coming loose.  To clean the glass use nail polish remover (Acetone) on a Kleenex.  Then apply 2 or 3 squirts of hairspray.  You may need to spread it around a little.  That surface preparation results in the best adherence of the printed parts.

I have made several upgrades to my 3D printer.  Like for instance an oversize fiberglass Y axis carriage.


Here it is printing out a Mendel90 X axis motor end.  I am working on printing out all the parts of the Mendel90 3D printer.


I used some packaging strap to hold the ribbon cable up.

This is a picture of my new extruder's hot end.  I need to mount the fan to something but it has survived hanging from the wires for quite a while.  Here is a link to a video showing it in operation. http://youtu.be/MVh2b1nGNW8?list=UU49j5FVUO2KIFyH2IXmGXjg

Here is my growing collection of "Bricks".  Things that did not turn out like they were supposed to.  I have made far too many bricks, so now I built the new extruder and hot end.

Here is a link to my latest video.
http://youtu.be/nLawLOgIe3Y?list=UU49j5FVUO2KIFyH2IXmGXjg

No comments: